What is SW020 AF HBK 010?
NAVSEA SW020-AF-HBK-010, Fifth Revision sets forth existing regulations for Navy and Marine Corps explosives drivers and shipping inspectors engaged in transporting ammunition, explosives and related hazardous materials (A&E) by military and commercial motor vehicles, railcars and MILVAN containers.
How often is an ESI inspection required Navy?
within 180 days
e. Commands receiving an overall UNSATISFACTORY shall be re-inspected within 180 days of the final dated ESI report. The CO, NOSSA shall make the final determination warranting a re- inspection. The final Re-ESI Report shall rate the Command’s Explosives Safety Program as either being COMPLIANT or NON- COMPLIANT.
How long is an explosive safety waiver generally issued for?
b.
(a) Consist of waivers and exemptions in accordance with DA Pamphlet 385-30 and are generally granted for a short period not to exceed 5 years, pending the cancellation of the DARAD or a correction of the deviation.
What publication provides Essa program requirements Navy?
Which publication provides training, license and physical requirements for Navy crane operators? NAVFAC P-307.
What is a DD Form 626?
DD Form 626, “MOTOR VEHICLE INSPECTION (TRANSPORTING HAZARDOUS MATERIALS)”
Who is responsible for verifying A&E physical inventory?
Commanding officers are responsible for the physical security of AA&E within their authority. b. Echelon 2 and Subordinate Commands. DON Echelon 2 and subordinate commanders are responsible for overseeing implementation of this instruction via inspections and inventory effectiveness reviews.
Which activity requires an Explosive Safety Submission?
General. (1) A munitions response safety submission or site plan may be required if the explosives contaminated media is of a high enough concentration to be explosive. No work involving handling or disposing of contaminated media will begin without an approved safety submission or site plan (if required).
What is the K factor in blasting?
K-factor – A scaling factor correlating the distance (D) and Net Explosive Weight (W) with a particular peak incident overpressure based on the Kingery-Bulmash relationship, as shown in Figure 1.
What is the withdrawal distance for HC D 1.2 explosives?
2,500 feet
For HC/D 1.2 (explosion and fragments), minimum distance is 2,500 feet.
Which publication provides weight handling equipment whe training requirements and inspections?
The proper licensing, operation, maintenance, and safe handling of weight-handling equipment is regulated by NPSINST 5100.11 (series), “Management of Weight Handling Equipment” with responsibilities delineated therein.
What is the Nomp?
Naval Ordnance Management Policy (US Navy)
Who fills out DD 2890?
Taxpayers download DD Form 2890 when they need to transfer hazardous products. If you have a business with dangerous goods shipment, you need this form filled for every transfer you organize. It must be provided to the Department of Defense.
What is the DD form 2890 used for?
Installations/units will use DD Form 2890, DoD Multimodal Dangerous Goods Declaration, Figure J-8, as a shipping paper and to provide emergency instructions to drivers when operating on public roads.
What 3 items make up explosive ordnance?
Explosive Ordnance (EO)
All munitions containing explosives, nuclear fission or fusion materials and biological and chemical agents.
What are the color codes for ammo?
YELLOW -INDICATES HIGH EXPLOSIVE. GRAY-INDICATES CHEMICAL. AMMUNITION. BROWN -INDICATES LOW EXPLOSIVE. DARK RED-INDICATES A RIOT AGENT. FILLER.
What is free face in blasting?
Free face: This is an exposed rock surface towards which the explosive charge can break out. It resembles a wall. Face height (H): This is the vertical distance in metres.
What is the density of ANFO?
Table 2
| Parameter | ANFO | EE |
|---|---|---|
| Loading density (g∙cm−3): | 0.75–0.85 | 0.90–1.20 |
| Detonation model: | Non-ideal | Ideal (provided it contains no stable components) |
| Detonation velocity (m∙s−1): | 1800–3300 | 3800–5100 |
| Water-resistance | No | Yes |
What is a 1.2 explosive?
Division 1.2 consists of explosives that have a projection hazard but not a mass explosion hazard. Examples are certain types of fireworks, some types of detonating fuses, and some types of ammunition.
What is a division 1.1 1.2 or 1.3 material?
Division 1.1: Substances and articles which have a mass explosion hazard. Division 1.2: Substances and articles which have a projection hazard but not a mass explosion hazard. Division 1.3: Substances and articles which have a fire hazard and either a minor blast hazard or a minor projection hazard or both.
What is a Category 1 crane?
Category 1 Cranes include: Portal Cranes. Hammerhead Cranes. Locomotive Cranes. Derricks.
What are the two parts of a frequent crane inspection?
Frequent inspections cover the operating mechanisms, parts of the air or hydraulic systems, and the hooks and hoist chains. These items need to be visually examined on a daily basis.
What is AA&E army?
PHYSICAL SECURITY OF ARMS, AMMUNITION AND EXPLOSIVES (AA&E)
FOR THE COMMANDER: OFFICIAL: DAVID A.
How long is Army HAZMAT certification good for?
Does my HazMat certification expire? Yes, you must renew your certificate every three years from the date on your last certification.
What does DD 2890 tell you?
The DD Form 2890 is used to document the movement of dangerous materials. A DD Form 2890C, DoD Multimodal Dangerous Goods Declaration (Continuation Sheet) may be attached to the original form when the space provided on it is not enough for the information about a shipment.