Is Armorseal 8100 an epoxy?

Is Armorseal 8100 an epoxy?

A two-component, water-based polyamine epoxy floor coating. The next-generation in water-based epoxy floor coatings, Armorseal 8100 features excellent chemical and abrasion resistance and is breathable. It is designed for use in commercial, industrial and residential floor applications.

What is Armorseal Rexthane used for?

A coating for the flooring environment, Armorseal Rexthane II cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings.

Is Armorseal tread-Plex an epoxy?

A high-solids, heavy-duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding industrial requirements.

How do you mix Armorseal 1000 HS?

Combine one Part A with one Part B by volume and mix for 3 minutes and until uniform. Allow the material to sweat-in as indicated. Re-stir before using. NOTE: Brush or roll application may require multiple coats to achieve maximum film thickness and uniformity of appearance.

How long does it take Armorseal 8100 to dry?

This product should not be used in place of a non-skid finish. To Cure Foot Traffic: 36 hours 18 hours 8 hours Drying time is temperature, humidity, and film thickness dependent. *If recoating after 72 hours, abrade surface first.

How long does it take Armorseal tread plex to dry?

Minimum substrate cure is 28 days at 75°F.

What is polyaspartic floor coating?

Polyaspartic is a hybrid material that resembles polyurethane. It was first developed in the ’90s as a coating for steel in bridges and used for its corrosion-resistant properties. This alternative to epoxy is also known as an aliphatic polyurea sealer, which is a mix of ester and other materials.

How long does Armorseal tread Plex last?

6 years

6 years and doing well.

Is Armorseal tread Plex waterproof?

ARMORSEAL TREAD-PLEX is a general purpose, interior/exterior, 100% acrylic, low odor, waterborne floor coating. This dries rapidly to a tough, alkali resistant finish which will withstand hard wear, abrasion, grease, oils, and cleaning equipment.

Can I epoxy my garage floor myself?

Painting epoxy on your garage floor is a great way to give your garage a more finished look. And it’s definitely something you can do yourself.

Is it worth it to epoxy garage floor?

Epoxy flooring protects the underlying concrete from moisture, stains, grease and cracks. In the long run, this can save you a great deal on cleaning and maintenance costs by eliminating the need to clean carpet or grout. It’s also very reasonably priced for the duration and level of protection that it offers.

How long does it take armor seal to dry?

Dry Time. Dry 12-24+ hours between coats when applying over raw or newly stained raw wood, and dry up 72+ hours between coats when working over a sealed surface. Dry times based on ideal conditions: 70°F/21°C; 50% humidity. The more layers of finish there are on a project, the longer it takes to dry.

Is water based epoxy breathable?

Water based epoxy systems are breathable and can be applied to “green” concrete, allowing water vapor transmission to pass through the coating without affecting adhesion of the epoxy flooring system.

How long does Armorseal tread-Plex last?

Is Armorseal tread-Plex waterproof?

Is polyaspartic coating better than epoxy?

Our Choice: Polyaspartic Floor Coatings
If you skipped to this bit, here’s the deal: Polyaspartic floor coating systems are better than epoxy and polyurethane systems because they look better longer. This is due to the chemistry involved. Not all polyaspartic products are the same.

Is polyaspartic more durable than epoxy?

Epoxy is very durable, but it is still vulnerable to abrasion. Polyaspartic, meanwhile, is more flexible, and won’t chip, scratch or scuff. It’s definitely more durable.

What Sheen is Armorseal tread-Plex?


Product # Sales Number Sheen
B90A00101-16 640172649 Semi-Gloss
B90A00101-20 640172656 Semi-Gloss
B90A00102-20 640172672 Semi-Gloss
B90R00103-16 640172680 Semi-Gloss

How long does armor seal tread Plex take to dry?

What is better than epoxy for garage floor?

Nowadays, polyurea coatings are a much better option. Here at Garage Force, our patented polyurea garage floor coatings are about 20 times stronger than epoxy coatings. That is a huge difference in strength!

What are the disadvantages of epoxy flooring?

Cons of Epoxy Flooring

  • Strong Application Fumes. During the epoxy application process, wet epoxy gives off an unpleasant smell.
  • Long Curing Time.
  • Slippery When Wet.
  • Economical Flooring Choice.
  • Resistant to Damage.
  • Weather-withstanding.
  • Aesthetically Pleasing.
  • Protects and Decreases Wear & Tear.

How do you apply armor seal?


How long do you have to stay off concrete after sealing?

Typically, it can take anywhere from 10-12 hours to dry before being able to be walked on, but they will continue to harden for up to 48 hours after being applied. Concrete sealed with a urethane coating should not be walked on (with the exception of a recoat), driven on, or wet for at least 36-48 hours.

How long does water based epoxy last?

20 years
This type of flooring can last up to 20 years if you take good care of it. It has the strength to fight off hot tire marks, abrasions, and chemical reactions like oil and grease. Water-based epoxy is more designed as a sealer since it spreads out much thinner than a solid one.

What is water based epoxy paint used for?

It is often used for DIY projects like garage floor paint because applying waterborne epoxy is almost as easy as painting a wall. Water based epoxies also have a long pot life, meaning you have a long time to work with it and perfect it before it cures. These products are also odorless, with no harsh fumes.