How big of a Bale does a John Deere 530 make?
1986 John Deere 530 Width of Bale: 5 Feet, JOHN DEERE RD BALE 5X6 BALES, JUST THRU OUR SHOP LAST MONTH, BELTS GOOD, PICKUP GOOD.
What size tractor do I need to run a big square baler?
“You don’t need to weave as much with a square baler as you do with a round baler, but it’s something you need to consider. Fortunately, any tractor large enough to handle a big square baler or large round baler is going to be adjustable beyond 60 inches.
How big of a tractor do you need to run a round baler?
The low horsepower round balers, like the 450E, 450M, and 550M models can be paired with any of the John Deere 5-Series or 6-Series utility tractors. The MegaWide models that require a minimum of 125 PTO HP need to be paired with a more heavy duty tractor like a 4WD or Row Crop tractor.
Is John Deere 530 a good baler?
A 530 is also a pretty good baler. Subject: Re: Good , Bad , Ugly, JD 530 Round Baler . No kicker and single tie arm . Ill bet a second twine arm could be added .
What size Bale does a John Deere 535 make?
The John Deere 535 is a pull-type, 540 rpm PTO driven baler with a variable cylindrical chamber and a drum pickup. The 535 baler produces hard core bales measuring 5.1 ft (1.6 m) wide and 1. 2. 3.
How much does it cost to cut a rake and bale hay?
A common rule of thumb is that it costs approximately $50 per ton to cut, rake, bale and stack hay at the edge of the field. That figure may be lower if doing lots of acres and it may be higher when doing small pieces.
How much is a new hay baler?
A good, serviceable square baler can be found from $500 to $2,500 depending on where your small farm is located and what time of year it is purchased. The baler compresses the hay into a packed bale weighing around 38 or 40 pounds, easily manageable by a lone farmer.
What is the width of a hay baler?
Baler dimensions
| Length w/ short tongue | |
|---|---|
| Length w/ long tongue | 576.5 cm 227 in. |
| Width | 274.3 cm 108 in. |
| Height | 170.2 cm 67 in. |
| Weight empty | 1411 kg 3110 lb |
How much horsepower does a 3×4 baler have?
Key Specs
| Bale | 90×120 cm 3×4 ft |
|---|---|
| Machine – Width | 3 m 9.8 ft |
| Machine – Height | 2.75 m 9 ft |
| Machine – Weight | 9,210 kg 20,370 lb |
| Minimum tractor requirement | 108 kW 145 PTO hp – no Pre-Cutter 119 kW 160 PTO hp – with Pre-Cutter |