Why is my BSM light flashing?
The RCTA system operates when the selector lever is shifted to the reverse (R) position. If there is the possibility of a collision with an approaching vehicle, the Blind Spot Monitoring (BSM) warning indicator lights flashes and the warning beep is activated simultaneously.
How do you reset the blind spot sensor on a Mazda 3?
Switch the ignition ON. Turn off the AUTOHOLD. Press the EPB switch continuously for 2 seconds or longer (until a sound is activated). Release the EPB switch and switch the ignition OFF within 5 seconds after the sound was activated.
How do I turn off BSM on my Mazda?
Always make it your responsibility as a driver to check the rear. The Blind Spot Monitoring (BSM) will operate when all of the following conditions are met: The ignition is switched ON. The Blind Spot Monitoring (BSM) OFF switch is pressed and the BSM OFF switch indicator light is turned off.
What is a BSM warning light?
BSM Warning Lights
The warning lights turn on when a vehicle approaching from the rear in an adjacent lane is detected.
What is BSM off on Mazda?
In the following cases, the Blind Spot Monitoring (BSM) OFF indication/indicator light turns on and operation of the system is stopped. If the Blind Spot Monitoring (BSM) OFF indication/indicator light remains illuminated, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible.
How do I turn on my BSM 2009 Mazda 6?
2012 – 2009 Mazda 6 Blind Spot Monitoring System Tutorial – YouTube
Where is the BSM sensor located?
BSM uses radar or ultrasonic sensors located inside the left and right sides of the rear bumpers as well as cameras in the side-view mirror housings to detect vehicles within their monitored areas.
Where is the BSM sensor located Mazda 3?
The rear side radar sensors are installed inside the rear bumper, one on the left side and one on the right side.
How do I turn off BSM light?
Q: How do I turn the Blind Spot Monitor on and off?
- Locate the button that activates the Blind Spot Monitor, which is located on the left side of your dashboard. It has the initials BSM.
- Press down to turn the system On or Off.
What does BSM off mean Mazda?
Blind Spot Monitoring
In the following cases, the Blind Spot Monitoring (BSM) OFF indication/indicator light turns on and operation of the system is stopped. If the Blind Spot Monitoring (BSM) OFF indication/indicator light remains illuminated, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible.
Where are the blind spot sensors located?
Most Blind Spot Warning systems use radar sensors, but some use cameras. The sensors are usually located under the rear bumper or side view mirrors. The sensors monitor the areas behind and next to your car. The detection area covers approximately one lane width on both sides of your car.
Where are BSM sensors Mazda 3?
rear bumper
The rear side radar sensors are installed inside the rear bumper, one on the left side and one on the right side.
How do I turn on BSM on Mazda 3?
Blind Spot Monitoring (BSM) – Mazda i-ACTIVSENSE Safety Features
What is BSM on Mazda?
Mazda i-ACTIVSENSE: Blind Spot Monitoring (BSM) – YouTube
How do I reset my blind spot sensor?
Turn off your vehicle’s engine and wait a few seconds.
After waiting a few seconds, try turning your car on and giving it a second to re-calibrate.
Where are the blind spot sensors on Mazda 3?
There are two radar sensors installed on both the Mazda 3 Sedan and Mazda 3 Hatchback model versions. They are located on the rear bumper, with one radar sensor on each side.
Where is the BSM button?
BSM w/ RCTA (Blind Spot Monitor w/ Rear Cross Traffic Alert) – YouTube
What is BSM light Mazda CX 9?
If there is the possibility of a collision with an approaching vehicle, the Blind Spot Monitoring (BSM) warning indicator lights flashes and the warning beep is activated simultaneously.
What does blind spot sensor look like?
Blind spot detection – YouTube
How do I turn on BSM?
To turn on this innovative safety feature, press the BSM button on the dashboard to the left of the steering wheel. You will hear a sound chime and see the lights illuminate on the side mirrors for a few seconds.
How do you turn on BSM on a Mazda?
The BSM will operate when all of the following conditions are met: The ignition is switched ON. The BSM OFF indicator light in the instrument cluster is turned off. The vehicle speed is about 10 km/h (6.3 mph) or faster.
How do you calibrate a blind spot sensor?
Service Resets & Relearns: Toyota Blind Spot Monitor Calibration
Which Mazda has BSM?
Mazda 3 Hatchback Touring, Mazda 3 Hatchback Grand Touring, and Mazda 3 Hatchback Touring 2.5 included BSM as a standard feature.
How do I reset my blind spot assist?
If you are going to tow a trailer or another vehicle you should turn off blind spot assist. To do so you can use the buttons on the steering wheel until you see the option for Blind Spot Assist. Enter this menu and turn it off using the OK button on the left side of the steering wheel.