Where is the RPO code for Silverado?
The RPO Codes can be found on a placard labeled “Service Parts Identification” in the glove box, on the trunk floor or inside the driver’s door panel.
What is a Chevy RPO code?
A Regular Production Option (RPO) is a General Motors standard coding for vehicle configuration options and began in 1970. These codes are a combination of 3 alphanumeric characters and refer to a specific option or modification to the vehicle including the paint color.
What is RPO code GU6?
GM RPO Codes, or General Motors “Regular Production Option” codes contain lots of valuable information about your GM vehicle.
…
GM RPO Codes – Factory Identification Labels and Interpretation.
| RPO Code | Description | Ratio |
|---|---|---|
| GU6 | Axle Rear | 3.42 |
| GU7 | Axle Rear | 2.77 |
| GU8 | Axle Rear | 3.90 |
| GU9 | Axle Rear | 3.91 |
What is RPO code Z95?
Z95: MagneRide magnetorheological damper system, utilizing magnetically controlled shocks and struts. ZW7: Premium Smooth Ride suspension, using conventional shocks in the front and self-leveling Nivomat shocks in the rear.
How do I decode a GM RPO code?
Decoding GM RPO Codes for Your Differential – YouTube
How do I tell what gear ratio my Silverado has?
Where To Find Your Chevy Or Gmc Truck Gear Ratios, GU4, GU6, GT4 …
How do I identify my GM rear differential?
Information about Differentials in GM vehicles can usually be obtained by looking at the RPO or “Regular Production Option” codes contained in the Service Parts Identification tag in the glovebox. Whenever possible, reference the tag numbers when ordering parts for your Differential.
What is Jl4 RPO code?
Rpo Code Jl4 (active Brake Control) Year 2005 Brake Line Kit By Technical Precision.
How do I know if I have z95 suspension?
In most cases this is a sticker located on the inside door of the glove box, with multiple three character codes listed to show what that specific vehicle has as far as trim, suspension and engine configurations.
How can I tell what rear end my Silverado has?
Chevrolet’s standard rear ends are the 10- and 12-bolt, 7.5- and 8.2-inch, and Dana 60. To determine the type of rear-end your Chevy has, you need to check the number of the cover bolts, the cover, and the gasket. Then locate the rear end casting date.
Will VIN number tell me gear ratio?
The gear ratio is usually listed in the VIN code located on driver’s door, the glove box, or the ID plate on the dashboard. Count the times a rear wheel goes around for one driveshaft turn: if its 3 1/2 it’s a 3.50:1. Divide the number of teeth on the ring gear by the number of teeth on the pinion gear.
Are 3.73 or 4.10 gears better?
3.73 VS 4.10 Ratio
| 3.73 Ratio | 4.10 Ratio |
|---|---|
| Not as fast off of the line | Quicker Off The Line |
| Lower Torque | Higher Torque |
| Better Gas Mileage | Decreased Gas Mileage |
| Higher Top Speed | Lower Top Speed |
How do I know if my Chevy has active brake control?
How to tell if your vehicle is equipped with Stabilitrak (Active Brake …
What is VSES on Silverado?
Vehicle Stability Enhancement System (General Motors)
How do I know if my Silverado has magnetic ride control?
GM trucks and SUVs have Service Parts Identification Label sticker inside the glove box. This label will have your VIN, Wheel Base, Model designation and a list of 3-digit/character RPOs (Regular Production Options). If you see code “Z55” on the label, you have Autoride electronic suspension.
What can go wrong with air suspension?
Failure of the air suspension tubing connecting the air struts or bags to the air system. Air fitting failure resulting from initial fitting or infrequent use. Compressor burn out due to air leaks in the springs or air struts from the compressor constantly engaging to maintain the proper air pressure.
How do I identify my Chevy rear differential?
If the ID tag or stamp is missing or unreadable, differentials can be identified by the number of cover bolts, the distinctive shape of the cover, the number of ring gear bolts, and ring gear diameter.
How do I tell what gear ratio my Chevy truck has?
What are 4.10 gears good for?
This equates to a greater amount of power transferred to the wheels. Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. If your car is equipped with an overdrive, you may not even notice a difference in gas mileage with the new higher gearing.
Is a 4.10 axle good for towing?
FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic.
How do I know if my truck has electronic stability control?
Typically, cars that have ESC have an indicator light on the dashboard. If the ESC indicator light switches on while you’re driving, it may mean one of several things. In some instances, the ESC light switches on if your car is actively trying to maintain traction control.
How do you tell if my truck has stabilitrak?
Does magnetic ride control Make a Difference?
The benefits of MagneRide are numerous. Not only does it reduce the internal complexity of the shock itself, it allows for incredibly rapid response to shifting driving conditions, with the original system capable of changing damping resistance in less than a millisecond.
Do magnetic shocks wear out?
As opposed to traditional suspension systems, MagneRide has no mechanical valves or even small moving parts that can wear out.
Can I drive without air suspension?
If your air suspension fails, you can likely drive to your local Advance Auto Parts, mechanic, or home, but you shouldn’t continue to daily drive with the failure. Failed air suspension parts cause negative handling characteristics and it beats up the rest of your vehicle.