What cable does a DVD drive use?
Verify connections
Your CD-ROM should have at least two cables connected to it: a Molex power cable and an ATAPI / IDE or SATA cable. The IDE or SATA cable should also connect to the motherboard or another interface card, and the power cable should connect to the power supply.
What is SATA power cable for?
The SATA technology itself is a connecter interface primarily used for computer bus connections in storage applications. In this application, the cables are used to connect a mass storage device (e.g. hard disk drives, optical drives, solid-state memory drives) to a host bus adapter such as a motherboard.
How many pins are in CD DVD drive power connector?
Disk drive
Production history | |
---|---|
Height | 6 mm (female), 8 mm (male) |
Pins | 4 |
Electrical | |
Signal | Yes |
What is the smaller SATA cable?
A small form factor version of the SATA data connector, known as mini-SATA or mSATA connector is designed for use with smaller, power-constrained devices such as laptops and tablets. The SATA power connector has 15 pins and supplies +3.3V DC, +5V DC and +12V DC.
How do I connect the power connector to my optical drive?
How to Install an Optical Drive into a Desktop PC – YouTube
What is the most common power connector is used for hard drives and optical drives?
4-pin Molex power connector
Virtually every ATA/IDE desktop hard disk drive uses a 4-pin Molex power connector. The same power connector, by the way, is also used by ATA/IDE optical drives (CD-RW, DVD-ROM, DVD rewritable, and so forth), and a small version is used by some types of ATA/IDE removable-media drives and by floppy drives.
Do SATA drives need a power cable?
Do SATA Hard Drives Require Power? They most certainly do. Almost all SATA drives require a power connector from the power supply unit.
Are there different types of SATA power cables?
There are three main types of SATA cable connections for computers: standard two-connection SATA cables, three-connection SATA cables, and eSATA cables.
What is ATX 12V 4 pin?
ATX 12V or the 4-pin CPU Connector
This is the 4-pin connector which supplies electrical current to your CPU and is mandatory to connect in the motherboard provided you are not using the EPS12V connector which is explained below. The ATX12V 4-pin connector is used by a majority of processors be it Intel or AMD.
What power connector do you use to connect to your hard drive?
The SATA 15-pin power supply connector is one of the standard peripheral power connectors in computers. It’s the standard connector for all SATA-based hard drives and optical drives. SATA power cables protrude from the power supply unit and are meant to reside only inside the computer case.
What is difference between SATA cable and SATA connector?
Physically there are no differences, since all connectors are the same. The difference is in the transfer speeds: SATA 1: It is the first generation of this data transfer interface and offers a bandwidth of up to 150MB / s. SATA 2: Second generation of this data transfer interface and offers 300MB / s bandwidth.
How do I know what SATA cable I have?
How to check cable SATA version – Serial ATA 3gb/s vs 6 Gb/s?
What cables connect to optical drive?
External optical drives are “installed” simply by connecting them to a USB or FireWire port, as appropriate, and connecting power. Internal optical drives are 5.25″ half-height devices, and require the same physical installation steps as any other 5.25″ externally accessible drive.
What is a hard drive power cable called?
If you’re building your own computer, one of the core components on your checklist will surely be a hard drive cable, also known as a SATA cable. They are specifically designed to connect motherboards and host controllers primarily to hard drives.
What is the hard drive power connector called?
Do hard drives need to be connected to power supply?
Hard drives require power to operate, depending on the type of drive an HDD requires either 5v or 12v. %v can be supplied through USB while hard drives that need 12v typically require a power adapter (external drives) or direct connection to the PSU (power supply unit) for internal drives.
Where do you plug in a SATA power cable?
SATA Data Cable
In short, one end should be connected to the port on your hard disk. The other end should be connected to the SATA connector port, which is found on the motherboard.
Is there a difference between SATA and SATA 3 cables?
SATA II vs. SATA III Cables – Is there a Speed Difference? (No!) The results are effectively identical. There is no measurable difference between differently-branded SATA cables as we tested.
What does ATX stand for?
Advanced Technology EXtended motherboard
(Advanced Technology EXtended motherboard) The PC motherboard that superseded the Baby AT design. The ATX layout rotated the CPU and memory 90 degrees, allowing full-length expansions to be plugged into all sockets.
What is the 4 pin 12V connector for?
The purpose of this new connector is to deliver more +12V current to the motherboard than is available from the standard ATX main power connector. The presence of the 4-pin +12V connector indicates that a power supply is ATX12V. The absence of that connector indicates that it is a standard ATX power supply.
What is hard drive power cable?
What Is Hard Drive Power Cable? hard drive power cables connect hard disk drives to power supply unit (PSU) on a computer motherboard power connecting. To make it simple, they are lines to connect hard disks and motherboards together.
Does a hard drive need a power cable?
drives typically require a 12V power connection, which is not provided by the USB port or the hard drive adapter. The power capabilities of the USB port combined with the power requirements of the attached drive will determine if the hard drive adapter will work in your setup.
Does a SATA cable provide power?
A typical hard drive including a 3.5″ HDD, 2.5″ HDD and 2.5″ SATA SSDs, all require a SATA Data cable and a SATA Power connector. So long story short. A typical SATA cable, aka SATA DATA cable, DOES NOT provide power. The power to the drives is delivered through the SATA power cables.
How do I know if I have SATA 2 or 3 cable?
How do I know if my laptop is SATA 2 or 3?
On the left in the device selection panel go to the Motherboard section. The right side of the window will show which SATA ports are available. If 6 Gb / s is written near the port, it means that it is SATA 3 standard. If 3 Gb /s is written near the port, it means that it is SATA 2 standard.