How do I reset my Bunn coffee maker?

How do I reset my Bunn coffee maker?

To reset “CLEAN” indicator, press and hold “H” and “M” buttons for 3 seconds during idle.

Why is my Bunn coffee maker not working?

Water in tank isn’t at the right temperature – Wait a few minutes to see if the temperature heats up. If it doesn’t, the brewer might have “Brew Lockout” enabled. Check your owner’s manual for disabling this function. ON/OFF switch issues – See if the switch is off, and turn it on.

Is there a fuse in a Bunn coffee maker?

Once you get the tank removed you are going to remove the fuse from the bottom of the tank and slide back the plastic covering to expose the old fuse. Cut the fuse out and crimp in the new one.

How long does it take for Bunn to heat up?

about 15 minutes
When you first set the Bunn BTX up, you add up to 10 cups of cold water to the water reservoir and turn the power switch on. It will take about 15 minutes to heat the water initially. This water will stay hot and ready until you go to brew a pot of coffee.

Does Bunn have lifetime warranty?

LIMITED WARRANTY Bunn-O-Matic warrants the BUNN Pour-Omatic® Coffee Brewer (“Brewer”) to be free from defects in material and workmanship existing at the time of manufacture and appearing within one of the following warranty periods: a) Three (3) years from the date of original purchase of a NEW BREWER.

Can you replace the heating element on a Bunn coffee maker?

The Bunn 01121.0000 warmer heating element kit allows you to easily replace the worn or damaged element and related components on select Bunn coffee brewers! Replacing a malfunctioning warming element ensures that your decanters of delicious coffee will stay hot for as long as you need them.

How do you clean a clogged Bunn coffee maker?

Here’s how to do it.

  1. Make a solution of one part vinegar to two parts distilled water. Vinegar is acidic and can easily break down calcium deposits.
  2. Pour the descaling solution into your coffee maker and initiate a brewing cycle.
  3. Perform at least three to five rinses by running a brewing cycle with only water.

Are you supposed to unplug a Bunn coffee maker?

Remember, don’t plug in the brewer unit before setting it up completely. Instructions: During this step make sure the machine is unplugged and switched off. The water heating switch is generally located on the right bottom side of the coffee maker.

How do you prime a coffee maker?

re-prime your machine.

  1. Turn your machine off. Put your steam wand over your drip tray.
  2. You have two options now. Either put the pipe into a container, that is above the machine OR use a turkey baster or a ketchup bottle to force water down the tube.
  3. Turn the machine on. Open the steam wand and hit the brew button!