What is UltraPly TPO?

What is UltraPly TPO?

Firestone UltraPly TPO Platinum membrane is a flexible, Thermoplastic Polyolefin (TPO) roofing membrane. It is reinforced with polyester, weft-inserted scrim. Firestone Platinum TPO is available in white, tan and gray. This reflective membrane is suitable for a variety of low-slope applications.

How do you install a Firestone TPO roof?

Once the substrate is exposed and clean we put down insulation. Then the cover board is installed. When that’s complete the TPO is rolled out adhesive is applied. And the tpo is set in place.

What is Firestone TPO?

Firestone UltraPly™ Platinum TPO is a thermoplastic roofing system you can trust to perform. Backed by a 30-year warranty, it delivers the reliability you expect from all Firestone products.

What is the difference between TPO and EPDM roofing?

TPO roofing reflects sunlight, allowing commercial air conditioners to work more efficiently; whereas EPDM has a dark surface, which in summer conditions will absorb heat, forcing cooling systems to work overtime. TPO offers reduced cooling costs and energy savings for facilities located in warmer climates.

Does Firestone make TPO?

Firestone’s UltraPly TPO roofing systems offer a variety of installation options to best meet the requirements of your project. Membrane panels are loose laid over the substrate and mechanically attached with plates and fasteners in the seams of adjoining sheets. The sheets are heat-welded.

How do you install a TPO on a flat roof?

“How to Install TPO Roofing” by RoofRepair101 – YouTube

What kind of glue do you use for TPO?

EverGuard® TPO Low VOC Bonding Adhesive is a contact-type bonding adhesive specially designed for bonding smooth back TPO single-ply roofing membranes and flashings to various roofing substrates.

Is PVC better than TPO?

While PVC offers better resistance to puncture and weathering, TPO (like PVC) is recyclable and environmentally friendly. Its reflective surface reduces UV radiation and helps with energy efficiency.

Is TPO roofing any good?

TPO can be a desirable option because it has a relatively low price point. Compared to PVC, TPO offers comparable energy efficiency and ability to weld hot-air at a fraction of the cost of PVC. TPO would be considered a strong roofing product because of its ability to resist tears, punctures and dirt and mold build-up.

How many years does a TPO roof last?

What is the life expectancy of a TPO roof? A thermoplastic Olefin (TPO) roof typically lasts as little as 22 years and up to a maximum of about 30 years. The two thermoplastic layers are adhered to a polyester scrim for reinforcement, becoming a single ply to protect your roof.

What are the disadvantages of a rubber roof?

Cons of Rubber Roofing

  • The appearance is one of the primary drawbacks.
  • Dry conditions are needed for proper installation of the rubber adhesive.
  • It is delicate and can easily be punctured by falling branches, or satelite dishes which can result in leakages.

Does TPO roofing need underlayment?

6. Underlayment. Like the cover board, an underlayment is usually made out of gypsum and acts as an extra layer under the insulation. This can improve the fire rating for buildings that require it, but isn’t necessarily essential to the TPO roofing system.

Can you walk on TPO roofing?

Flat Roof Surfaces You Can Walk On

Whether its BUR (Built-up Roofing), TPO (Thermoplastic polyolefin), Modified Bitumen, or Single Ply Roofing, your roofing professional can apply the right waterproofing membrane to make it possible to walk on.

How do you fully stick TPO?

TPO – Fully Adhered – YouTube

Can you install TPO over plywood?

TPO is a single-ply membrane that can be installed over the top of the plywood. Although there are different types of roofing material, like metal or wood shingle roofs, this type provides an alternative because it’s much cheaper.

Can you put TPO over existing roof?

If the existing roof is in good enough condition, a TPO membrane can beapplied over an existing roof system after an insulation board has been applied over anexisting built-up roof system or other single ply membrane.

Can TPO be used on sloped roof?

In over 90% of residential applications, TPO membrane is applied to flat or very shallow-sloped roofs, but not always. Any sloped roof can handle the material. Costs are likely to increase though if TPO membrane is applied to a sloped roof.

Can you walk on TPO roofs?

What is the life expectancy of a TPO roof?

Can you walk on TPO roof?

What is the average cost of TPO roof?

How much should a TPO roof cost? The TPO roofing cost per square foot will differ from project to project, but in most cases, it will be between $3.50 and $9.50. Overall, most people can expect the price to range from $7,000 and $11,500.

How many years does a rubber roof last?

If installed correctly, you can expect a rubber roof to in excess of up to 50 years. Because an EPDM flat roof is compromised of durable rubber, it can withstand extreme weather conditions such as hail or snow and common weather such as rain and strong winds.

Do rubber roofs leak?

Leaks and moisture
EPDM rubber is a waterproof material that should protect your home in all weather conditions. However, if you’ve had poor installation or little maintenance, leaks can still occur during rainy periods.

Can you put TPO directly over plywood?

Can you walk on a TPO roof?