How do you find the bearing number?
The first digit indicates the width or height series (dimensions B, T or H). The second digit identifies the diameter series (dimension D). The last two digits of the basic designation identify the size code of the bearing bore. The size code multiplied by 5 gives the bore diameter (d) in mm.
What size is 6202 bearing?
Dimensions
| Bore diameter | 15 mm |
|---|---|
| Outside diameter | 35 mm |
| Width | 11 mm |
How do you find the bearing number from OD and ID?
Measuring your bearing: Most bearings are measured in three ways, the inside diameter or (ID), the outside diameter or (OD) and the width or (W). It is important to note that our bearing measurements are all done in the following order: Inside diameter (ID) x Outside diameter (OD) x Width (W).
What size is a 6205 bearing?
Dimensions
| Bore diameter | 25 mm |
|---|---|
| Outside diameter | 52 mm |
| Width | 15 mm |
What does ZZ mean on a bearing?
Common Shield Types
An alternative option is the ZZ Type or ‘2Z’ shielded bearing, which features a metal shield on both sides of its sides.
What does J mean on a bearing?
“J” Type: Two piece ribbon consisting of two halves that are assembled one half from one side, and the other half from the opposite side. Fold down tabs secure the two halves. This type of cage is guided by the balls. “Loose” clinch type provides lower torque.
What size is a 6305 bearing?
DIMENSIONS
| d | 25 mm | Bore diameter |
|---|---|---|
| D | 62 mm | Outside diameter |
| B | 17 mm | Width |
| d1 | ≈ 36.6 mm | Shoulder diameter |
| D2 | ≈ 52.7 mm | Recess diameter |
What size is a 6303 bearing?
Dimensions
| Bore diameter | 17 mm |
|---|---|
| Outside diameter | 47 mm |
| Width | 14 mm |
What size is a #10 ball bearing?
Table 1 – Standard Bearing Sizes
| Basic # | Bore | OD Ball |
|---|---|---|
| 300 | 10 | 35 |
| L01 | 12 | 28 |
| 201 | 12 | 32 |
| 301 | 12 | 37 |
What size is a 6209 bearing?
Dimensions
| Bore diameter | 45 mm |
|---|---|
| Outside diameter | 85 mm |
| Width | 19 mm |
What does DD mean on a bearing?
Other suffixes from various brands
| Meaning | SKF | NSK |
|---|---|---|
| Deep groove ball bearing with d <10mm and contact seal on one side | RS1 | D |
| Deep groove ball bearing with d <10mm and contact seal on both sides | 2RS1 | DD |
| Deep groove ball bearing with contact seal on one side | RS1 | DU |
| Extra capacity design | E | E |
What does J stand for on a bearing?
“J” Type: Two piece ribbon consisting of two halves that are assembled one half from one side, and the other half from the opposite side. Fold down tabs secure the two halves. This type of cage is guided by the balls. “Loose” clinch type provides lower torque. Material is type 302 stainless steel.
What size is a 6006 bearing?
Dimensions
| Bore diameter | 30 mm |
|---|---|
| Outside diameter | 55 mm |
| Width | 13 mm |
What size is a 30205 bearing?
30205 Timken Tapered Roller Bearing 25x52x16. 25mm
| Dimensions – d (inside diameter) | 25mm |
|---|---|
| Dimensions – D (outside diameter) | 52mm |
| Dimensions – B (width) | 16.25mm |
What size is a 6204 bearing?
Dimensions
| Bore diameter | 20 mm |
|---|---|
| Outside diameter | 47 mm |
| Width | 14 mm |
What is the best grade of ball bearings?
The quality of bearing can be defined by various ratings, such as the rating of ball roundness. A high quality steel ball bearing is consider grade 25. The grade number refers to the tolerance per millionth of an inch.
What is the most common bearing size?
Ball bearing size charts are widely available, and can be used to find the measurements of a specific bearing. Series 6200 and 6300 are the most commonly used, and typically range from 10 x 30 x 9 mm (. 394 x 1.181 x . 354 in) to 150 x 320 x 65 mm (5.906 x 12.598 x 2.559 in).
What size is a 6309 bearing?
Dimensions
| Bore diameter | 45 mm |
|---|---|
| Outside diameter | 100 mm |
| Width | 25 mm |
What does LLB mean on a bearing?
better for hubs
On most other bearings 2RS means that the seal is made from rubber and has one sealing lip rubbing on any flat part of the inner race. Enduro’s seals are usually either LLU (usually the MAX type bearings) or LLB (better for hubs).
What size is a 6201 bearing?
Dimensions
| Bore diameter | 12 mm |
|---|---|
| Outside diameter | 32 mm |
| Width | 10 mm |
What is a 30205 bearing?
Single row tapered roller bearing. Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring.
How many balls are in a 6204 bearing?
eight balls
SKF Deep-Groove Ball Bearing, 20mm ID, 47mm OD – 6204
The unit has an inner and outer ring which houses eight balls that rotate in response to machine movement.
What is the hardest ball bearing?
Steel. This is the standard steel for most ball bearings. It is harder than stainless steel meaning greater life ratings. It also has superior low noise qualities to standard 440 grade stainless steel.
How can you tell the quality of a bearing?
The rocking test is where the wheel bearing will be checked for quality by applying pressure to the top and bottom of the wheel. This creates a rocking motion on the wheel. If there is any open ended free play happening, this means the bearing is unstable and must be replaced.
Which bearing is the best?
Angular contact bearings are the best bearing choice for high-speed applications. One reason is that the balls are smaller and smaller balls weigh less and produce less centrifugal force when rotating.