How do I reset my Salus RT500RF?
The Reset Button is provided as a way to restore the programmable thermostat to its default factory settings. Pressing this button will delete any previously entered settings. By pressing both the UP and DOWN keys together, the RT500RF will enter SLEEP mode.
Why won’t my Salus thermostat connect?
If the RED and GREEN LED’s on the receiver are NOT flashing, you will need to Re-Pair the Thermostat and Receiver. To do this, slide the ON/OFF switch on the receiver to OFF and then slide it back to ON. The RED LED will now flash. Now, enter the pairing process by choosing Menu > Pairing > PAIR.
How do I reset my Salus wireless thermostat?
The Backlight Liquid Crystal Display (LCD) gives a highly visible, easily readable indication of the programmable thermostat status. Press the buttons together for 3 sec. Press Up or Down to select the hour format. After power up, the thermostat is reset.
How do I Reset my rt500rf thermostat to factory settings?
Reset Button The Reset Button is provided as a way to restore the programmable thermostat to its default factory settings. Pressing this button will delete any previously entered settings. Sleep Mode By pressing both the UP and DOWN keys together, the RT500RF will enter SLEEP mode.
What is a programmable thermostat Sal US rt500rf?
Sal us RT500RF Manual: 89 INTRODUCTION A programmable thermostat is a device that combines the functions of both a room thermostat and heating controller into a single unit. The programmable thermostat is used to switch the heating system in your home on and off as needed.
What power supply do I need for my rt500rf receiver?
Sal us RT500RF Manual: 89 7/10 10: 10 The RT500RF Receiver should be mounted in a suitable location that is both accessible for the connection of mains and control wiring, and allows good reception of the RF signal. The Receiver needs a 230V AC mains supply to operate, and this should be fused appropriately (1 3A max.).
Where should I mount the rt500rf control centre?
The ideal position to locate the RT500RF Control Centre is about 1 .5m above floor level. It should be mounted in a location where the thermostat is accessible, reasonably lit and free from extremes of temperature and draughts.