How do I reset Moxa EDS 408a?

How do I reset Moxa EDS 408a?

The reset button is to reset the Ethernet switch to factory default settings by pressing and holding the reset button for 5 seconds. Use a pointed object, such as a straightened paper clip or toothpick, to depress the reset button. This will cause the STATE LED to blink once a second.

How do I reset Moxa?

Reset Button—Press the Reset button continuously for 5 sec to load factory defaults: Use a pointed object, such as a straightened paper clip or toothpick, to press the reset button. This will cause the Ready LED to blink on and off.

How do you connect a Moxa box?

Use the Ethernet IP address to connect to the box. Type the default Ethernet IP address into the URL field of Internet Explorer. Plug Moxa unit into your network via an RJ45 Ethernet cable or connect it directly into your PC using an RJ45 Ethernet cable.

How do you connect to a Moxa?

SOLUTION

  1. Check the PIN assignments of the Moxa device and the serial device that you want to connect.
  2. Connect the positive (B) pin of the Moxa device to the positive (B) pin of the serial device and the negative (A) pin of the Moxa device to the negative (A) pin of the serial device.

What is the use of moxa converter?

Moxa’s serial media converters allow devices with different serial interfaces to communicate effortlessly. Serial-to-serial converters help convert between RS-232 and RS-422/485, and serial-to-fiber converters convert all three of these interfaces to optical fiber.

What is Moxa Turbo Ring?

Turbo Ring is a technology developed by Moxa in 2007 that provides network redundancy for systems have network redundancy. Essentially, Turbo Ring connects all switches in a ring topology. Usually when this is done with unmanaged switches, an infinite loop is created thus creating a network failure.

How do you connect moxa?

Type the default Ethernet IP address into the URL field of Internet Explorer. Plug Moxa unit into your network via an RJ45 Ethernet cable or connect it directly into your PC using an RJ45 Ethernet cable….

  1. Go to Network Settings / WLAN Settings / WLAN.
  2. Click Submit.
  3. Unplug Ethernet cable.