How do I connect my printer to my Dlink router?

How do I connect my printer to my Dlink router?


  1. Browse to “”. Use “admin” as the username and password to log in.
  2. Click “Wireless,” then “Wi-Fi Protected Setup.” Select “Enabled” and then click “Apply,” if necessary.
  3. Click “Start PBC.” Press the WPS button on the printer within two minutes to connect the device to the TRENDnet router.

What is a DIR-655?

The D-Link DIR-655 Wireless N Gigabit Router is an 802.11n compliant device designed for use by users who demand higher performance networking. Featuring a 3×3 antenna design, the DIR-655 router provides superior whole home coverage whilst eliminating dead spots. It is also faster than 100Mbps wired Ethernet1.

How do I setup a print server on my router?

Connecting Your Printer to Your Router

  1. Use a USB cable to connect your printer to the USB port on your wireless router.
  2. Turn on the printer and wait at least 60 seconds for the router to recognize it.
  3. Run your router’s software on your computer to configure the router to turn on print server mode.

How do I connect my wireless printer to Ethernet?

Step 2 connect a network printer. Using the Ethernet network Jack to a router with an Ethernet cable.

How do I add a USB printer to my Dlink router?

Step 1: Connect your USB drive to the USB port on your router. Step 2: From the Finder, click Go > Connect to Server. Step 3: Enter SMB:// and click Connect. Step 4: If prompted for a username and password, enter the router”s login information.

What is the use of USB port in Dlink router?

In effect, it turns any supported USB device into a networked device. It knocks down the walls and gives you access to USB devices that aren’t sitting on your desk … or desktop PC.

Can a Dlink DIR 655 be used as a repeater?

This means you still have to connect it via ethernet cable to a switch or a router then it will broadcast a signal for you. It doesn’t have any means of joining an existing wireless network wirelessly to act as a repeater. You’ll need to find a device specifically that does this.

How do I reset my Dlink DIR 655 router?

How to factory reset your D-Link router – YouTube

Can I connect my printer to my router?

Go to your router, find the WPS button, and press it to start that process. Back on the printer’s LCD screen, select OK or Next to have your printer look for the router’s WPS signal. If the printer can detect the WPS signal broadcast from your router, it connects to the Wi-Fi network.

How do I make my network printer accessible?

Turn on Sharing in Settings

  1. Select the Start button, then select Settings > Network & Internet > Wi-Fi.
  2. Under Related settings, select Change advanced sharing options.
  3. In the Advanced sharing settings dialog box, expand the Private section.
  4. Under File and printer sharing, select Turn on file and printer sharing.

How do I connect my printer to my network?

How do I setup a printer on a network?

To install or add a network, wireless, or Bluetooth printer

  1. Select the Start button, then select Settings >Devices > Printers & scanners. Open Printers & scanners settings.
  2. Select Add a printer or scanner. Wait for it to find nearby printers, then choose the one you want to use, and select Add device.

Can I plug my printer into my router?

To connect a printer to a wired router you will need to connect an Ethernet cable from the back of the router to your printer. After connecting the printer to the router, it will appear as a networked device in your local network.

Can I connect a USB printer to an Ethernet router?

If your router does not support USB functionality, you will need to purchase a print server to connect your printer to a network. Connect the printer to the USB port on your router. If your router has a USB port, you can easily connect your printer to the router using the USB port.

Can I plug a USB into my router?

The best use of the USB port on a router is probably the ability to connect an external storage device. Simply plug your external storage device into the router and you’ll be able to access it through a PC, laptop, mobile, or really any device that is connected to your network.

Can I connect to my router with USB?

To connect your USB modem to an Android tablet and extend your tablet’s functionality, install an application like PPP Widget 3 from the Google Play Store so the Android tablet will recognize the modem. Next, use a USB OTG cable to connect the modem to the Android’s MicroUSB port.

How do I use my old Dlink as a Wi-Fi extender?

Step 1: Make sure your computer or mobile device is connected to the DIR-505 by Wi-Fi. Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local into the address bar. Step 2: At the login page, enter the Admin password.

How do I enable repeater mode on my Dlink router?

Click Login. Step 3: Click the Wireless tab on the top and then click Wireless Repeater from the menu on the left-hand side. Or click on Site Survey to display the list of available APs for selection. Select the desired AP and Click Next to continue.

How do I refresh my Dlink router?

Power OFF the device. Press and hold the ‘reset’ button; while doing so, power on the device again and keep holding the ‘reset’ button for another 10 seconds. Then release the button and wait until device restarts.

How do I setup a printer on my home network?

How to connect a printer to your home network.

  1. Open the Control Panel.
  2. Click Hardware and Sound.
  3. Double-click the Add a printer icon.
  4. Select Add a network, wireless or Bluetooth printer and click Next.
  5. Let Windows scan for the printer. If detected, select the printer and click Next.

How do I setup a network printer with an IP address?

Windows Vista/7

  1. Click Start->Devices and Printers (Vista/7).
  2. Right click anywhere in the window and select Add Printer.
  3. Click Add Local Printer.
  4. Select Create new port.
  5. Then pick standard TCP/IP port from the list.
  6. Click Next.
  7. Enter the hostname or IP address of the printer in the hostname box.
  8. Click Next.

How do I know what IP address my printer is on?

How to Find Your Printer’s IP Address

  1. Open your printer’s Control Panel.
  2. Go to Settings.
  3. Click Wireless Settings.
  4. Print a page called Network Configuration, which will contain your printer’s IP address.

Can not find printer on network?

Restart the printer and try again. Unplug the printer from an outlet. You can plug it back in again to see if it works this time. Check if the printer is properly set up or connected to your computer’s system.

How do I add a printer using IP address?

Select the printer from the list of detected devices. If the printer doesn’t appear, click “The Printer That I Want Isn’t Listed” and select “Add a Printer Using a TCP/IP Address or Hostname.” Enter the static IP address assigned to the printer, then click “Next.”

How do I find a network printer IP address?